The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 25 (click to view)
Johnson Millennium
Section - 2 Setting Up
�When the Tone controls are used, the display will appear as follows on page 2 of the Amplifier module when the Millennium is in Edit mode:
a:gain lvl
B:GAIN LVL
3. 70
LINK CHANGED EQ GATE DIGITAL
2
USER
1
. 40
2
WAH
. 50
TUBE
4
. 70
L/R OUTS
LINK CHANGED
LINK CHANGED
LINK CHANGED
BANK PAGE
2 OF 5
�Using the <Page> knob turn to page 4 and the display will appear like this:
CHN B:TREB
MID
3
EQ GATE DIGITAL
BASS
4
2
LINK CHANGED
2
WAH
25 .
TUBE
. 25
25 .
L/R OUTS
LINK CHANGED
LINK CHANGED
LINK CHANGED
USER
BANK PAGE
4 OF 5
Amplifier Model and Channel Selection
Selecting Amplifier types in the Millennium is as easy as pushing a button. To call up any one of the Amplifier model types, simply press one of the six buttons in the <Amplifier Modeling> button array, or turn the <2> when the Millennium is in edit mode on page 1 of the Amplifier module. Subsequent presses of any one of the Amplifier model buttons will move you through the selected Amplifier model menu. A-B channel switching can be achieved within the Amp model by pressing the <Channel> button, or turning the <4> button while the Millennium is on page 1 of the Amplifier module in edit mode. Always remember to save any changes.
Amplifier Contour Control
Using the <Contour> knob will give you the ability to control the tonal qualities of the Power Amp section of the Millennium. When the <Contour> knob is turned all of the way down, the power amp tone is flat. Turning up the knob brightens up the signal in the Power Amp section.
Digital Effects
Wet/Dry Mix Adjustments Global or Local
To change the mix of dry and wet signal of the overall effect level, use the <Mix/Page> knob. Mix settings range from 0 (all dry) to 100% (all wet) when the Millennium Wet/Dry mix is set to Local. When the Wet/Dry mix is set to Global (setting the Wet/Dry mix either Local or Global is done on page 2 of the Utility menu), the mix control effects the percentage of Wet/Dry mix in every preset. As the acoustics of any room change, you can easily adjust the mix of your effects accordingly with the turn of a knob. The Master Mix of each preset can be modified in the Master Mix menu while in edit mode by pressing the <Edit> button then scrolling through the Preset pages until the the L/R Out and speaker icons blink.