|
Who's Online
There currently are 5727 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Section 3
Configuring the DriveRack�
3.5- H Driver Alignment Delay
DriveRack
�
The second Delay section of the DriveRack� units is used to fine tune delay times within an enclosed speaker or an array of speakers. Enter the Configuration creation section of the DriveRack� by pressing and holding the PROGRAM/CONFIG button. Now use the PARAMETER 2 and 3 knobs to move to the selected output Delay section.
3.5- I Output Routing and Phase Compensation
From the Configuration creation mode, the DriveRack� gives you the option of routing any digital output to any of the eight analog outputs of the DriveRack� unit. This means that the digital output signal can be routed to any one of the eight physical outputs. Options for numbering Outputs names include: 1-8 . This means that two signals that are sent to the same output, will be summed to one output that shares the same name. In addition to output routing, each output section of the DriveRack� unit offers phase compensation within the selected output module.
3.6 Linking Modules
The DriveRack� provides the user with an option to link like modules together (ie; four 31 band Graphic EQs and so on) so that when a change is made in a selected program to one module, the change will affect all of the like modules. This linking feature can be applied to every module used in any single configuration. The following procedure will illustrate how to perform this feature.
� While you are in Configuration mode, use the PARAMETER 2 and 3 to scroll to the module section that you wish to link. For this example, we will use the Graphic (G) EQ modules. Once a single Graphic EQ module has been selected, you can select all of the Graphic EQ modules by pressing the PARAMETER 3 knob, and the display will appear something like this:
� At this point, rotate the PARAMETER 3 knob to select all four Graphic EQ modules, then press the PARAMETER 2 knob to link the modules together. Once this has been done,
®
28
DriveRack� User Manual
|
|
|
> |
|